Novastar VX600 Video Controller For Stage Event Rental LED Display Video Wall

Short Description:

The VX600 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 6 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX600 unit can drive up to 3.9 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.

INQUIRY NOW Whatsapp Email

Product Detail

Product Tags

Introduction

The VX600 is NovaStar's new all-in-one controller that integrates video processing and video control into one box. It features 6 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX600 unit can drive up to 3.9 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.

The VX600 is capable of receiving a variety of video signals and processing high-resolution images. In addition, the device features stepless output scaling, low latency, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.

What's more, the VX600 can work with NovaStar's supreme software NovaLCT and V-Can to greatly facilitate your in- field operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.

Thanks to its powerful video processing and sending capabilities and other outstanding features, the VX600 can be widely used in applications such as medium and high-end rental, stage control systems and fine-pitch LED screens.

Certifications

CE, UL&CUL, IC, FCC, EAC, UKCA, KC, RCM, CB, RoHS

Features

⬤Input connectors

− 1x HDMI 1.3 (IN & LOOP)

− 1x HDMI 1.3

− 1x DVI (IN & LOOP)

− 1x 3G-SDI (IN & LOOP)

− 1x 10G optical fiber port (OPT1)

⬤Output connectors

− 6x Gigabit Ethernet ports

A single device unit drives up to 3.9 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.

− 2x Fiber outputs

OPT 1 copies the output on 6 Ethernet ports.

OPT 2 copies or backs up the output on 6 Ethernet ports.

− 1x HDMI 1.3

For monitoring or video output

⬤Self-adaptive OPT 1 for either video input or sending card output

Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.

⬤Audio input and output

− Audio input accompanied with HDMI input source

− Audio output via a multifunction card

− Output volume adjustment supported

⬤Low latency

Reduce the delay from the input to receiving card to 20 lines when the low latency function and Bypass mode are both enabled.

⬤3x layers

− Adjustable layer size and position

− Adjustable layer priority

⬤Output synchronization

An internal input source or external Genlock can be used as the sync source to ensure the output images of all cascaded units in sync.

⬤Powerful video processing

− Based on SuperView III image quality processing technologies to provide stepless output scaling

− One-click full screen display

− Free input cropping

⬤Easy preset saving and loading

− Up to 10 user-defined presets supported

− Load a preset by simply pressing one button

⬤Multiple kinds of hot backup

− Backup between devices

− Backup between Ethernet ports

− Backup between input sources

⬤Mosaic input source supported

The mosaic source is composed of two sources (2K×1K@60Hz) accessed to the OPT 1.

⬤Up to 4 units cascaded for image mosaic

⬤Three working modes

− Video Controller

− Fiber Converter

− Bypass

⬤All-round color adjustment

Input source and LED screen color adjustment supported, including brightness, contrast, saturation, hue and Gamma

⬤Pixel level brightness and chroma calibration

Work with NovaLCT and NovaStar calibration software to support brightness and chroma calibration on each LED, effectively removing color discrepancies and greatly improving LED display brightness and chroma consistency, allowing for better image quality.

⬤Multiple operation modes

Control the device as you wish via V-Can, NovaLCT or device front panel knob and buttons.

Appearance

Front Panel

No.	Area	Function
1	LCD screen	Display the device status, menus, submenus and messages.
2	Knob	Rotate the knob to select a menu item or adjust the Press the knob to confirm the setting or operation.	parameter value.
3	ESC button	Exit the current menu or cancel an operation.
4	Control area	Open or close a layer (main layer and PIP layers), and show the layer status.Status LEDs: − On (blue): The layer is opened. − Flashing (blue): The layer is being edited. − On (white): The layer is closed. SCALE: A shortcut button for the full screen function. Press the button to make the layer of the lowest priority fill the entire screen. Status LEDs: − On (blue): Full screen scaling is turned on. − On (white): Full screen scaling is turned off.
5	Input sourcebuttons	Show the input source status and switch the layer input source.Status LEDs: On (blue): An input source is accessed. Flashing (blue): The input source is not accessed but used by the layer. On (white): The input source is not accessed or the input source is abnormal. When a 4K video source is connected to OPT 1, OPT 1-1 has a signal but OPT 1-2 does not have a signal. When two 2K video sources are connected to OPT 1, OPT 1-1 and OPT 1-2 both have a 2K signal.
6	Shortcut functionbuttons	PRESET: Access the preset settings menu. TEST: Access the test pattern menu. Freeze: Freeze the output image. FN: A customizable button

Note:

Hold down the knob and ESC button simultaneously for 3s or longer to lock or unlock the front panel buttons.

Rear Panel

Connector
3G-SDI
	2	Max. input resolution: 1920×1200@60Hz HDCP 1.4 compliant Interlaced signal inputs supported Custom resolutions supported − Max. width: 3840 (3840×648@60Hz) − Max. height: 2784 (800×2784@60Hz) − Forced inputs supported: 600×3840@60Hz Loop output supported on HDMI 1.3-1
DVI	1	Max. input resolution: 1920×1200@60Hz HDCP 1.4 compliant Interlaced signal inputs supported Custom resolutions supported − Max. width: 3840 (3840×648@60Hz) − Max. height: 2784 (800×2784@60Hz) − Forced inputs supported: 600×3840@60Hz Loop output supported on DVI 1
Output Connectors
Connector	Qty	Description
Ethernet ports	6	Gigabit Ethernet ports Max. loading capacity: 3.9 million pixels Max. width: 10,240 pixels Max. height: 8192 pixels Ethernet ports 1 and 2 support audio output. When you use a multifunction card to parse the audio, be sure to connect the card to Ethernet port 1 or 2. Status LEDs: The top left one indicates the connection status. − On: The port is well connected. − Flashing: The port is not well connected, such as loose connection. − Off: The port is not connected. The top right one indicates the communication status. − On: The Ethernet cable is short-circuited. − Flashing: The communication is good and data is being transmitted. − Off: No data transmission
HDMI 1.3	1	Support monitor and video output modes. The output resolution is adjustable.
Optical Fiber Ports
Connector	Qty	Description
OPT	2	OPT 1: Self-adaptive, either for video input or for output− When the device is connected with a fiber converter, the port is used as an output connector. − When the device is connected with a video processor, the port is used as an input connector. − Max. capacity: 1x 4K×1K@60Hz or 2x 2K×1K@60Hz video inputs OPT 2: For output only, with copy and backup modes OPT 2 copies or backs up the output on 6 Ethernet ports.
Control Connectors
Connector	Qty	Description
ETHERNET	1	Connect to the control PC or router.Status LEDs: The top left one indicates the connection status. − On: The port is well connected. − Flashing: The port is not well connected, such as loose connection. − Off: The port is not connected. The top right one indicates the communication status. − On: The Ethernet cable is short-circuited. − Flashing: The communication is good and data is being transmitted. − Off: No data transmission
USB	2	USB 2.0 (Type-B):− Connect to the control PC. − Input connector for device cascading USB 2.0 (Type-A): Output connector for device cascading
GENLOCKIN LOOP	1	Connect to an external sync signal. IN: Accept the sync signal. LOOP: Loop the sync signal.

Note:

Only the main layer can use the mosaic source. When the main layer uses the mosaic source, PIP 1 and 2 cannot be opened.

Dimensions

The VX600 provides the flight case or carton packaging. This section provides the dimensions of the device, flight case and carton, respectively.

Tolerance: ±0.3 Unit: mm

Specifications

ElectricalParameters	Power connector	100–240V~, 1.5A, 50/60Hz
	Rated powerconsumption	28 W
OperatingEnvironment	Temperature	0°C to 45°C
	Humidity	20% RH to 90% RH, non-condensing
StorageEnvironment	Temperature	–20°C to +70°C
	Humidity	10% RH to 95% RH, non-condensing
Physical Specifications	Dimensions	483.6 mm × 351.2 mm × 50.1 mm
	Net weight	4 kg
PackingInformation	Accessories	Flight Case	Carton
		1x Power cord1x HDMI to DVI cable 1x USB cable 1x Ethernet cable 1x HDMI cable 1x Quick Start Guide 1x Certificate of Approval 1x DAC cable	1x Power cord1x HDMI to DVI cable 1x USB cable 1x Ethernet cable 1x HDMI cable 1x Quick Start Guide 1x Certificate of Approval 1x Safety Manual 1x Customer Letter
	Packing size	521.0 mm × 102.0 mm × 517.0 mm	565.0 mm × 175.0 mm × 450.0 mm
	Gross weight	10.4 kg	6.8 kg
Noise Level (typical at 25°C/77°F)		45 dB (A)

Video Source Features

Input Connectors	Bit Depth		Max. Input Resolution
HDMI 1.3 DVI OPT 1	8-bit	RGB 4:4:4	1920×1200@60Hz (Standard) 3840×648@60Hz (Custom) 600×3840@60Hz (Forced)
		YCbCr 4:4:4
		YCbCr 4:2:2
		YCbCr 4:2:0	Not supported
	10-bit		Not supported
	12-bit		Not supported
3G-SDI	Max. input resolution: 1920×1080@60Hz DOES NOT support input resolution and bit depth settings. Supports ST-424 (3G), ST-292 (HD) and ST-259 (SD) standard video inputs.