Linsn Sending Card TS802D For Full Color LED Display
Features
TS802 is a sending card for full color led screen, and supports single and double color led screen as well.
One card can support 1310720 pixels; supports 4032 pixels in width at most; and 2048 pixels at most in height.
It has below features:
⬤One DVI video signal input;
⬤One Audio signal input；
⬤Sending card is set by USB; can be cascaded to drive a larger screen, up to 4 cards cascaded；
⬤Two network outputs; single port maximum support 655360 pixels；
⬤Supports adjusting brightness manually (require working with outer box) ；three scales can be set:16-grade, 32-grade and 64-grade；
Supports 60Hz and 30Hz output mode；
Capability
| 60Hz mode（using two ports） | 30Hz mode（using two ports） |
| 2048 × 640 | 4032 × 512 |
| 1920 × 672 | 3840 × 544 |
| 1792 × 720 | 3584 × 576 |
| 1600 × 800 | 3392 × 608 |
| 1472 × 880 | 3200 × 640 |
| 1344 × 960 | 3072 × 672 |
| 1280 × 1024 | 2880 × 704 |
| 1024 × 1280（require supporting by graphics card） | 2560 × 800 |
| 832 × 1280（ require supporting by graphics card ） | 2368 ×864 |
| 640 × 1280（ require supporting by graphics card ） | 2048 × 1024 |
| Note, |
| The capabilities above need to be supported by the capability of the graphics card (or video processor); for ultra-long or ultra-high resolution, please use GTX1050(one of the graphics card type) or use other graphics card with same or higher configuration) |
| The output of one port of TS802 cannot exceed 655360 pixels (which is half of 1310720 pixels). |
Pinouts
Working conditions
|
Rated voltage（V） |
5 |
maximum |
5.5 |
minimum |
4.5 |
|
Rated current（A） |
0.50 |
maximum |
0.57 |
minimum |
0.46 |
|
Rated power consumption（W） |
2.5 |
maximum |
3.1 |
minimum |
2.1 |
|
Working temperature（℃） |
-20℃ ~ 75℃ |
||||
|
Working humidity（%） |
0% ~ 95% |
||||
